Important advantages of using TMR method (feeder mixer)
tds edit Recovered –mobile 17 cubic meters mixer feeder
Mobile 17 cubic meter mixer feeder Today, with the advancement of technology and the researches of dear experts, it has been proven that the use of mixer feeders is very important for feeding the livestock. All feeds are monotone so no digestive problems including infections, metabolic constipation, acidosis and ketosis for livestock. The food is not wasted; as a result the mixed food can easily be digested. If the food is not digested, it can lead to serious problems. For instance too much additives and supplements can cause illness or even death of the animal.
Improve the feed production
Making livestock mixer feeders in Techno Dam Sanat is a new leap in preparing animal feed, increasing the quality and the production speed, which is very important. If the mixer feeders (mixer-forage) are not used, the production activity will increase with laborious and costly work which as a result will increase the price of dairy and meat products.
It should be noted that feeding in the livestock industry requires the science of management. In the breeding of dairy cattle the high level of production will lead to a very complex and important management process and it requires an up-to-dated technology that is used in the TMR method for a monotone and nutritionally balanced food that increases the percentage of fat and protein in milk of livestock.
The characteristics of mobile 17 cubic meters mixer feeder:
⦁ It increases the quality of feed and significantly increases the milk and meat production
⦁ By the use of this device the milk production increases by 5% to 10%.
⦁ Using a mixer feeder to feed cows will increase the milk production between 500 and 900 kg in a lactation period for each cow
⦁ The fat and protein content of milk increases with increasing dry matter and the final product will have a better taste
⦁ Control and management of livestock grouping and preparation of appropriate rations (forage), control and management of livestock feed will become better, more accurate and easier, the human error will also be minimized.
⦁ The need for labor will be reduced
⦁ The need for manpower will be reduced significantly
⦁ Cows eat a certain amount of forage and concentrate which is needed for their good health. It is more difficult to select cows and separate them when eating.
What are the characteristics of a good mixer?
⦁ Uniformity after a short time
⦁ Careful handling for the desired mixture
⦁ No forage should be left in the mixer feeder and it should be removed completely
⦁ The possibility of adding liquids
⦁ Variable acceptance speed
⦁ The possibility of being washed quickly and easily
Disadvantages of the old (traditional) method
⦁ Significant reduction in the amount and quality of milk and meat
⦁ Regular and unplanned production process of animal feed
⦁ Increased gastrointestinal diseases, including infections and other diseases
⦁ Dependence and need for professional labor force and low number of human force for preparing animal feed
⦁ Lack of control and supervision over the activity and feeding of livestock
Mechanism and capabilities of Techno Dam Sanat’s
Mixer feeder (small feed) is made of two horizontal ugers behind the tractor with a reducing system for the spiral and chain and it has a weighing system with a Persian menu that can be connected to USB drive. Programs can be uploaded and downloaded by this connection. It has the ability to adjust the height of the unloading system and rear loading with the system Hydraulic and mechanical system
In addition, inside the feeder of techno Dam Sanat’s mixer feeders, some industrial augers (spiral) are uniquely designed, which can mix fodder or any dry matter and minerals in different dimensions and sizes with its own rotation and special blades, and mix them perfectly.
Solar gearbox:
This type of mixer feeder has a solar gearbox with reduced speed capability along with a book gearbox and two output shafts. Using this type of gearbox can cause feeders’ better performance with the least pressure and maximum power. It will reduces the need for heavy tractors and reduces costs.
While it is necessary the book gearbox with two output shafts allows the operator to reverse the rotation of the auger by connecting the tractor blade to the second shaft. When an object or anything else falls in the feeder tank and disrupts the circulation of the auger by preventing the device from malfunctioning and longevity, the operation of the two-shaft gearbox allows the mixer feeder operator to fix the caused problem by the reverse speed easily.
Let’s not forget to say that the transmission of power from the main gearbox to the auger is done by a gearbox.
Hydraulic system:
Cable hydraulic control system
Use high-quality parts
Hydraulic system separate from the tractor
Rear loading shovel:
With a rear direction hydraulic loading shovel
Easy and high speed loading and weighing animal feed
Shovel loading capacity of 300 kg
Control by all hydraulic system
With 2 jacks (5 gears)
Drain system:
This mixer feeder has a chain conveyor to unload the animal feed evenly, which makes the work easier and faster by adjusting the appropriate throwing height in the manger.
The standard length of a chain conveyor is 140 cm, but if needed, you can also order the conveyor custom in the desired size and dimension.
Tank and chassis (double):
In this feeder mixer, ST anti-wear and stainless alloy steels are used in order to create resistance to abrasion created by forage. Also due to the higher density and feed pressure in the floor of this feeder mixer, thick steel sheets (custom) have been used. In addition, in body construction of this mixer feeder, due to its greater resistance to stress and in order to increase its strength and quality, CO2 welding has been used.
Another advantage of this device is the use of a very durable and high quality double chassis which is connected so that the rear wheels can tolerate the weight of the device and the food inside it.
Mixer feeder after sale services
Pre-sale service
1. Providing general technology and business consulting services.
2. Offer the most suitable designs and equipment for our customer.
3. Designing and producing of machines according to the specific demands of customers.
After sale services
1. Careful examination of the device in any working method. Quality is the first priority.
2. Help the customers to build the base and infrastructure of the equipment.
3. Sending engineers to install and troubleshoot equipment. Training line operators on site.
4. Regularly support for the customers to solve their production problems.
We have more than 15 years of experience, we will provide the best pre-sales and after-sales service for our dear customers.
Reviews
There are no reviews yet.